TFA 42.5003, Инструкция, Страница: 7 / 8

Clock mode
Clock mode is indicated by "CLK". The 24-hour clock is displayed. To set the clock,
depress the left button over 2 seconds and then release it. Press the left button again
to advance the flashing minute or depress it over 2 second for fast advance. Press
the right button to confirm the minute set and repeat the procedures to set hour.
Press the right button again to confirm the hour set and the clock setting is finished.
Average Speed mode
Average Speed mode is indicated by " AVS". The average speed since the last reset
is displayed. It is updated every ten-second count of the timer. The average speed is
reset to 0.0 km/h or mile/h once the tripmeter or timer is reset or overflows.
(Note: The average speed has a range of 0.0 to 99.9 km/h or mile/h and a reset
value of 0.0)
When the cycling speed is slow (about 10 km/h or below), the LCD sometimes
displays "00", because the sensor is less sensitive at very low speed. The display
reverts to the correct speed again. *See Important Note at back of manual *
Maximum Speed mode
Maximum Speed mode is indicated by "MXs". The maximum speed since the last
reset is displayed. The maximum speed is reset once the timer or the tripmeter is
reset or overflows.
(Note: The maximum speed has a range of 0.0 to 99.9 krn/h or rnile/h and a
reset value of 0.0.)