58
"Date. Month." (for 24h time display)
"Month. Date." (for 12h time display)
3.
The minute will be flashing. Press the + key or CH/- key to just the minutes.
4.
Confirm with the SET key and enter the
“Calendar Setting”
or exit the setting mode
by pressing the MIN/MAX key.
CALENDAR SETTING
The date default of the temperature station is 1. 1. of the year 2006 after initial set-up. Once
the radio-controlled time signals are received, the date is automatically updated. However,
if the signals are not received, the date can also be set manually. To do this:
1.
The year is flashing. Using the + key or CH/- key, set the year required. The range
runs from 2006 to 2029 (default is 2006).
2.
Press the SET key to enter the month setting mode.
3.
The month digit will be flashing. Press the + key or CH/- key to set the month and
then press the SET key to go to the day setting.
Year
