Quick reference
30.3306.02 Rain sensor
WeatherHub Sensor
This is a sensor for the " WeatherHub" system, it can be used with this
system only. To use the sensor you need a WeatherHub gateway.
Sensor set up
Open the battery compartment (screwed) of the rain sensor and insert
2 x 1,5V AA batteries with the correct polarity.
Positioning
Resolve the seesaw inside the sensor. Place the rain-gauge on open
ground and mount it horizontally, ideally 1m above the ground. The
rain sensor is self-emptying.
Add Sensor
Open the app, dashboard is displayed. Tap "Add new sensor" and
scan the QR code on the bottom of the rain sensor. Then set a name
for the sensor.
Specifications
Batteries:
2 x 1,5V AA
Battery life:
approx. 2 years (alkaline)
Operating temperature:
0°C to +40°C
Resolution:
0,25 mm
Measuring range:
0 to 300 mm per hour
Frequency:
868,3 Mhz
Transmission range:
100m (open area)
More information and detailed instructions can be found in the app at
“Info”,
www.tfa-dostmann.de/weatherhub
or at
The declaration of Conformity can be found at:
Old batteries do not belong into general household waste.
You are obliged to return used batteries to your vendor or
collection points.
Electrical devices have to be disposed separately from the
general household waste. Take your old electronics to
your local waste collection point or recycling centre.
