43
2.
Use the IN key to adjust the hours and the OUT key to adjust the minutes. If you hold the key while
you adjust, the hours move 1 hour and the minutes move 5 minutes.
3.
Confirm with the SET key and enter the
“
Calendar setting
” or exit the setting mode by pressing the
CH key.
Note:
The unit will still try and receive the signal despite it being manually set. When it does receive the signal, it
will change the manually set time into the received time. During reception attempts the DCF tower icon will
flash. If reception has been unsuccessful, then the DCF tower icon will not appear but reception will still be
attempted the following day.
CALENDAR SETTING:
Year (flashing) Date (flashing) Month (flashing)
The date default of the weather station is 1. 1. of the year 2011. Once the radio-controlled time signals are
received, the date is automatically updated. However, if the signals are not received, the date can also be
set manually. To do this:
1.
Using the IN key, set the year required. The range runs from 2011 to 2039 (default is 2011).
2.
Press the SET key to enter the month and date setting mode.
3.
Press the IN (or OUT) key to set the date and the OUT (or IN) key to set the month required.
4.
Confirm with the SET key and enter the “
°C/°F
temperature setting”
or exit the setting mode by
pressing the CH key.
