![Textron Tempo Marker-Mate EML 100 Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/textron/tempo-marker-mate-eml-100/tempo-marker-mate-eml-100_instruction-manual_1098004011.webp)
7
Pinpoint Feature
The HI - LO (UP/DOWN arrows) are used to toggle the Pinpoint feature ON and
O F F. The advanced Pinpoint feature allows the adjustment of the detection
threshold, making it possible to narrow the detection area to a precise location.
(See Figures 22 & 23) Refer to the Pinpoint Feature in the Operation Section.
Exit Key
Mode Selection
The EXITKey is used to exit the MENU screen (see MENU Key above).
Scan / Specific Mode
The EXIT Key may be used to toggle between SCAN and the type of marker
being detected. (See Figures 24 & 25)
3. OPERATION
Note: After the Power-On Sequence the unit will default to the settings last used.
Normal Operation
To locate a known type of marker (i.e. Gas, Power, Water etc.):
1. Press the ON key and allow the unit to complete the Power On
Sequence that shows the Firmware version and estimated battery
hours. Replace batteries if necessary. (Refer to Maintenance Section)
2. Press the MENU key.
a) Press the UP or DOWN keys to the VOLUME level desired.
3. Press the MENU key again to access the MODE Select menu.
a) Use the UP or DOWN arrow keys to select the desired MODE.
4. Press the MENU key again to select the POWER SAVE menu.
a) Use the UP or DOWN arrow keys to set an automatic shut off time
or to turn the POWER SAVE TIMER off.
5. Press the MENU key again to view the estimated BATTERY HOURS
remaining.
6. Press EXIT to begin searching for the selected type of marker.
Note: These settings will be saved and used the next time the unit is turned on.
Scan Operation
To locate all compatible markers using the SCAN Mode:
1. Perform steps 1 - 6 in Unit Set-Up above.
2. Press EXIT to enter the SCAN Mode and locate all compatible markers.
3. Press the EXIT key repeatedly to toggle between the SCAN mode and
a specific marker type mode.
Note: In SCAN mode, the EML100 will display the readings for the strongest
signal being received.
Fig. 22 - Sample Gas Display
Fig. 23 - Gas Pinpoint Mode
Fig. 24 - Sample Display
Fig. 25 - Scan Mode