SB750-55-10
Page 8
Revision 4 - April 7, 2016
Citation
SERVICE BULLETIN
SB750-55-10
(3)
Run the secondary trim system to full leading edge down position.
(a)
Make sure the EICAS indicated position is 12 degrees, +0.6 or -0.6 degrees.
(b)
Make sure the EICAS position indication is not amber.
(4)
Run the trim system to full leading edge up position.
(a)
Make sure the EICAS indicated position is 1.2 degrees, +0.3 or -0.3 degrees.
(b)
Make sure the EICAS position indication is not amber.
11.
Install access panels 343RL and 343TR. (Refer to the Cessna Model 750 Maintenance Manual, Chapter
6, Access Plates and Panels Identification - Description and Operation.)
12.
Put the AVIONICS and EICAS switch in the OFF position.
13.
Turn the power off.
A.
Disconnect external electrical power.
14.
Make sure that ICA-750-55-00001 - HSTA ECM ICAW Supplement is available for future maintenance.
NOTE:
ICA Supplements can be found at www.cessnasupport.com in the Aircraft Publications, Service
Document section. If assistance is needed contact Customer Care at 316-517-5800.
15.
Record that this service bulletin has been completed.
A.
Complete a Maintenance Transaction Report.
B.
Put a copy of the completed Maintenance Transaction Report in the airplane logbook.
C.
Send a copy of the completed Maintenance Transaction Report to: CESCOM C/O Camp Systems
International, 8200 East 34th Street North, Building 1600 Suite 1607 Wichita, KS 67226.
