Textron PROWLER 500 2018 Скачать руководство пользователя | Manualshive

Страница: 41 / 60

background image

39

3300C



NOTE: Not using a battery charger

with the proper float maintenance
will damage the battery if connected
over extended periods.

Charging



NOTE: Use of the CTEK Multi US

800 or the CTEK Multi US 3300 for
battery maintenance charging is rec-
ommended.

1. Be sure the battery and terminals

have been cleaned with a baking

soda and water solution.

2. Be sure the charger and battery are

in a well-ventilated area and ensure

the battery charger cables will not

contact any battery acid. Be sure the

charger is unplugged from the 110-

volt electrical outlet.

3. Connect the red terminal lead from

the charger to the positive terminal

of the battery; then connect the black

terminal lead of the charger to the

negative terminal of the battery.

4. Plug the charger into a 110-volt elec-

trical outlet.

5. By pushing the Mode button (A) on

the left side of the charger, select the

Normal Charge Icon (E). The Nor-

mal Charge Indicator (C) should

illuminate on the upper left portion

of the charger.

6. The battery will charge to 95% of its

capacity at which time the Mainte-

nance Charge Indicator (D) will illu-

minate.



NOTE: For optimal charge and per-

formance, leave the charger con-
nected to the battery for a minimum
1 hour after the Maintenance Charge
Indicator (D) illuminates. If the bat-
tery becomes hot to the touch, stop
charging. Resume after it has
cooled.

7. Once the battery has reached full

charge, unplug the charger from the

110-volt electrical outlet.



NOTE: If, after charging, the bat-

tery does not perform to operator
expectations, bring the battery to an
authorized dealer for further trouble-
shooting.

Jump-Starting



NOTE: Jump-starting a vehicle

with a dead battery is not recom-
mended but rather removing the bat-
tery, servicing it, and correctly
charging it; however, in an emer-
gency, it may be necessary to jump-
start a vehicle. If so, use the follow-
ing procedure to carefully and safely
complete this procedure.

1. On the vehicle to be jump-started,

remove the battery cover and any

terminal boots.

2. Inspect the battery for any signs of

electrolyte leaks, loose terminals, or

bulging sides. Leaking or bulging

battery cases may indicate a frozen

or shorted battery.

! WARNING

Improper handling or connecting of a
battery may result in serious injury
including acid burns, electrical burns,
or blindness as a result of an explo-
sion. Always remove rings and
watches.

! WARNING

Any time service is performed on a
battery, the following must be
observed: keep sparks, open flame,
cigarettes, or any other flame away.
Always wear safety glasses. Protect
skin and clothing when handling a
battery. When servicing battery in
enclosed space, keep the area well-
ventilated. Make sure battery venting
is not obstructed.

«
...
39
40
41
42
43
...
»

Содержание PROWLER 500 2018





























































Отзывы:

Нет отзывов

Похожие инструкции для PROWLER 500 2018

Бренд: J&M Страницы: 26

Бренд: Wacker Neuson Страницы: 138

Бренд: Yamaha Страницы: 44

Бренд: Yamaha Страницы: 92

Бренд: Yamaha Страницы: 141

Бренд: Yamaha Страницы: 262

Бренд: Ventrac Страницы: 45

Amazon P80 2019

Бренд: Morgan Olson Страницы: 81

Бренд: PRONAR Страницы: 121

Бренд: PRONAR Страницы: 131

Бренд: E-Z-GO Страницы: 78

Quad Lander 250

Бренд: Sym Страницы: 223

Бренд: Yamaha Страницы: 108

Бренд: Samsung Страницы: 54

Бренд: Samsung Страницы: 172

Бренд: Raven Страницы: 26

Бренд: Snorkel Страницы: 160

Бренд: Snow Hawk Страницы: 207

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды