Textron PROWLER 500 2018 страница 40 Скачать руководство пользователя | Manualshive

Страница: 40 / 60

background image

38

Battery

The battery is located under the seat on

the driver’s side.

PK007

After being in service, batteries require

regular cleaning and recharging in order

to deliver peak performance and maxi-

mum service life. The following proce-

dures are recommended for cleaning and

maintaining lead-acid batteries. Always

read and follow instructions provided

with battery chargers and battery prod-

ucts.



NOTE: Refer to all warnings and

cautions provided with the battery or
battery maintainer/charger.

Loss of battery charge may be caused by

ambient temperature, ignition OFF cur-

rent draw, corroded terminals, self dis-

charge, frequent start/stops, and short

engine run times. Frequent winch usage,

snowplowing, extended low RPM opera-

tion, short trips, and high amperage

accessory usage are also reasons for bat-

tery discharge.

Maintenance Charging



NOTE: Use of the CTEK Multi US

800 or the CTEK Multi US 3300 for
maintenance charging is recom-
mended. Maintenance charging is
required on all batteries not used for
more than two weeks or as required
by battery drain.

1. When charging a battery in the vehi-

cle, be sure the ignition switch is in

the OFF position.



NOTE: Be sure to maintain the

fluid of the battery at the UPPER
LEVEL. Use only distilled water
when adding fluid to these batteries.

2. Clean the battery terminals with a

solution of baking soda and water.

3. Be sure the charger and battery are

in a well-ventilated area and ensure

the battery charger cables will not

contact any battery acid. Be sure the

charger is unplugged from the 110-

volt electrical outlet.

4. Connect the red terminal lead from

the charger to the positive terminal

of the battery; then connect the black

terminal lead of the charger to the

negative terminal of the battery.



NOTE: Optional battery charging

adapters are available from your
authorized dealer to connect directly
to your vehicle from the recom-
mended chargers to simplify the
maintenance charging process.
Check with your authorized dealer
for proper installation of these
charging adapter connectors.

5. Plug the battery charger into a 110-

volt electrical outlet.

6. If using the CTEK Multi US 800,

there are no further buttons to push.

If using the CTEK Multi US 3300,

press the Mode button (A) at the left

of the charger until the Maintenance

Charge Icon (B) at the bottom illu-

minates. The Normal Charge Indica-

tor (C) should illuminate on the

upper portion of the battery charger.

800A



NOTE: The maintainer/charger will

charge the battery to 95% capacity at
which time the Maintenance Charge
Indicator (D) will illuminate and the
maintainer/charger will change to
pulse/float maintenance. If the bat-
tery falls below 12.9 DC volts, the
charger will automatically start again
at the first step of the charge
sequence.

«
...
38
39
40
41
42
...
»

Содержание PROWLER 500 2018





























































Отзывы:

Нет отзывов

Похожие инструкции для PROWLER 500 2018

Бренд: Access Motor Страницы: 22

Бренд: Suzuki Страницы: 54

Бренд: Massimo Страницы: 170

MAVERICK X3 Series 2017

Бренд: Can-Am Страницы: 155

Бренд: Arctic Cat Страницы: 9

Бренд: Arctic Cat Страницы: 24

Бренд: Arctic Cat Страницы: 92

Utility Vehicle

Бренд: TOMCAR Страницы: 150

2015 Cadillac Escalade

Бренд: ACG Страницы: 15

Бренд: Bad Boy Страницы: 152

Бренд: Hammerhead Страницы: 24

Бренд: Baja Страницы: 55

Бренд: Baja motorsports Страницы: 8

Бренд: Landoll Страницы: 62

Бренд: Range Road Страницы: 21

MARSH MASTER 2015

Бренд: COAST MACHINERY Страницы: 59

Бренд: Yamaha Страницы: 59

Бренд: Taylor-Dunn Страницы: 233

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды