Textron MPE 850 MARINE, Руководство по обслуживанию

Страница: 24 / 96

24 SHB MPE850 Rev F | 408014 | 408090 | 408101 | 408246 |
3.10.1 Lights in vehicle
3.10 Supported vehicle equipment
3 Description
3.10 Supported vehicle equipment
The lights described in this chapter are controlled by the engine management system. Observe the
information in the vehicle manufacturer‘s documentation.
Light Description
Service light When the service light is illuminating, the next service interval is
reached and service tasks are required.
► The required service tasks must be performed in a qualified
workshop. All Textron Motors authorized workshops are qualified
to service your engine.
Observe that only the regular operating hours intervals will be indicated.
The service light does not indicate the 1st service and the yearly
service intervals. (See chapter 4.1 Service intervals.)
Oil pressure light The oil pressure light illuminates after the engine is started until the
required oil pressure is achieved.
NOTICE! Serious engine damage due to insufficient lubrication. If the
oil pressure light remains on after starting the engine, the required oil
pressure is not built up.
► Turn off the engine immediately.
► Immediately inspect the cause and repair possible faults by a
qualified workshop. All Textron Motors authorized workshops are
qualified to repair your engine.
Malfunction indicator light (MIL) The malfunction indicator light has a self-test function. When you
turn on the ignition or start the engine, the malfunction indicator light
illuminates for a few seconds.If the malfunction indicator light does
not stop illuminating or illuminates during the operation, the engine
diagnostics has detected an fault. If the malfunction indicator light is
flashing, there is an emission-related fault.
► Immediately inspect the cause and repair possible faults by a
qualified workshop. All Textron Motors authorized workshops are
qualified to repair your engine.