Instruction
manual
SDK502
page
8
__________________________________________________________________________
4. Description of the hydraulic cutting tool
The hydraulic cutting tool SDK502 consists of the following components:
picture 1
carrying
handle Lock
Ring
Pos.-No.
3
Pos.-Nr.
6
Pos.-Nr.
7
cutting blades
cutting head
coupling sleeve
high pressure hose
Pos.-No. 1
Pos.-No. 2
Pos.-No. 4
Pos.-No. 5
Table 1
Pos.-No. Description
Function
1
blades
two sickle-shaped knifes to cut the cables/conductors
2
cutting head
body of the working unit
3
handle
carrying grips to move and position the unit
4
coupling sleeve
leakage-free hydraulic coupling
5
hydraulic hose
Steel armed hydraulic high pressure hose
6
Lock
Knurled nut with internal thread to prevent the ring to
be pulled back to release the plug
7
Ring
Spring loaded knurled ring which must be pulled back
to engage/disengage the plug
5. Remarks in respect to the determined use
The pump must be positioned on an even surface with a max. angle of 15°.
In combination with a 2 m high pressure hose it is not possible to work in a cable trench.
For this application you need at least a 3m pressure hose.
5.1. Operation of the unit
1.) Roll out the hose completely.
2.) Connect the cutting head (Pos.-No. 2) to the high pressure hose (Pos.-No. 5). The
cutting head (Pos.-No. 2) is connected with the hydraulic pump via a coupling sleeve
(Pos.-No. 4). After releasing, respectively screwing off, the lock (Pos.-No. 6) the ring
(Pos.-No. 7) can be pulled back in order to insert the couplings plug of the pump.
