Textron Klauke SDK 202, Инструкция по эксплуатации

Страница: 9 / 14

Instruction manual SDK 202 page 9
__________________________________________________________________________
4. Description of the hydraulic cutting tool
4.1. Description of components
The hydraulic cutting tool SDK202 consists of the following components:
picture 1
carrying handle Lock Ring
Pos.-No. 3 Pos.-Nr. 6 Pos.-Nr. 7
cutting
blades cutting head coupling hydraulic hose
Pos.-No. 1 Pos.-No. 2 Pos.-No. 4 Pos.-No. 5
Table 1
Pos.-
No. Description Function
1 Blades two sickle-shaped knifes to cut the cables/conductors
2 Cutting head Body of the working unit
3 Handle Carrying grips to move and position the unit
4 Coupling Leakage-free hydraulic coupling
5 Hydraulic hose Steel armed hydraulic high pressure hose
6 Lock Knurled nut with internal thread to prevent the ring to
be pulled back to release the plug
7 Ring Spring loaded knurled ring which must be pulled back
to engage/disengage the plug
5. Remarks in respect to the determined use
The pump must be positioned on an even surface with a max. angle of 15°.
In combination with a 2 m high pressure hose it is not possible to work in a cable trench.
For this application you need at least a 3m pressure hose.