Textron Klauke ESSG120/2, Инструкция по эксплуатации и сервисное обслуживание

Страница: 19 / 45

Instruction Manual ESSG page 19
___________________________________________________________________________
3. Warranty
If correct operation is guaranteed and regular service is provided our warranty is 1 year
from the time of delivery. Short circuit damages are excluded. The warranty does also not
cover the cutting blades which are subjected to ware within the determined use.
4. Description of the hydraulic safety cutting unit
4.1. Description of the components
The hydraulic safety cutting unit type ESSG consists of the following components:
Table 1 (see picture 1)
Pos.-No. Description Function See page
1 Drive unit Main pump unit with pressure gauge and
grounding connection
2 Light Diode Display
LED
indicator for tool functions (e.g. tool
errors and Service) and battery charge control
3 Connecting device To connect the high pressure hose to the pump
(consisting of male and female coupling)
4 Trigger switch to start cutting procedure
5 Transportation lock Hook to fix the trigger to avoid unintended
operation
6 Release button To actuate the relief valve to return the oil into
the oil reservoir
7 Key ring Loop to secure the tool and/or for assembly
purposes
8 Pressure gauge Scale indicating the operating pressure of the unit
9 Insulating hose Non conducting high pressure hydraulic hose
type Europower (CIJN) 852
10 Bending protection Prevents that the minimum bending radius does
not fall short.
11 Cutting head Working unit to cut cables and conductors
12 Cutting blades pivoting (a) and moveable (b) blades to cut not-
reinforced cables and conductors
13 Battery rechargeable 2,6 Ah NiMH battery (RA4)
14
Removable hand
guard guard to protect the operating hand, not for
transportation
15 Grounding connection Hookup for the grounding pillow at the cutting
head and at the drive unit
4.2. Brief description of the important features of the unit
- The unit is equipped with a special brake which stops the forward motion of the
piston/blade (Pos.-No. 12) when the trigger (Pos.-No. 4) is released.
- The unit is equipped with a double piston pump which is characterised by a rapid
approach of the blades (Pos.-No. 12) towards the connector and a slow cutting motion.
- The cutting head (Pos.-Nr. 11) can be smoothly turned by 360° around the longitudinal
axis in order to gain better access to tight corners and other difficult working areas.
- The ESSG is equipped with a microprocessor which indicated service intervals, internal
checks and low battery charges.