7
4. Remove from conductor and
read maximum amperes.
Low battery
indication
Load-latching
electronics lock
on maximum
Amps
Warning label
“Hotstick Required”
Battery compartment –
uses replaceable
9V lithium or alkaline
3. Hang on conductor for a
minimum of 5-10 seconds.
2. Attach to hotstick using
universal spline.
1. Inspect HALO. Turn on by
pressing “On/Reset” button
and check for “Low Battery”
indication on Display.
Replace battery if needed
before using.
Molded plastic head, guides
conductor in proper position
eliminating errors due
to varying conductor
sizes and locations
Epoxy encapsulated
sensing coil
Strength reinforcing collar
3.5 digit,
liquid crystal
display (LCD)
Maximum display
of 1,999 Amps
“OFF” button
“On/Reset” button
Membrane style
control panel
Universal
spline for
hotstick
28"
(71cm)
5. Reset display by depressing
the “On/Reset” button down
for a minimum of 2 seconds.
HALO is ready to use again.
When finished, turn HALO
off by depressing “Off” button
and return HALO to case.
