LHFS-210003 Pruner
Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
13
Assembly
(cont’d)
3. Install the lock (31) onto the cutter hook (30) and
secure with the #10 x 1/4 inch socket head cap
screw (32) and #10 lock washer (24).
Note: If the slot in the lock (31) does not align with
the threaded hole in the cutter hook (30), turn the
lock over. This will allow the lock to be positioned so
that the slot will line up with the threaded hole in the
cutter hook, allowing the #10 x 1/4 inch socket head
cap screw to secure it in place.
4. Securely tighten the two 1/4 x 7/8 inch hex head
cap screws (17) that secure the brace (21) and hook
(30) to the mounting bracket (18).
5. Slide the cutter and mounting assembly onto the
extension tube (10).
6. Connect the cutter hook (29) and rod end (7)
together with the link arm (25, 28) and lock pins (27).
Insert the spacer (26) between the two link arms (25,
28). Secure the link arms (25, 28) with the #10-32 x
5/8 inch hex head machine screw (23) and #10 lock
washer (24). Tighten securely.
7. Move the blade (29) and the connecting linkage to
the fully-closed position. When the blade is fully
closed, it should cover about 1/3 of the surface of
the hook (30).
8. When proper closure is attained, install the two
1/4-28 x 7/8 inch hex head cap screws (17) and
1/4-28 hex lock nuts (19) which secure the cutter
and mounting assembly to the extension tube (10).
Tighten securely.
