Battery-powered Ratcheting Cable Cutter
Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
4
IMPORTANT SAFETY INFORMATION
Battery
• Use this tool for manufacturer’s intended use only.
Use other than that which is described in this
manual can result in injury or property damage.
• Do not cut guy wire or steel rod.
• Do not cut ACSR with he ESR1000LX
• Do not exceed the rated capacity of the tool.
Failure to observe these precautions may result in
injury or property damage.
Do not allow any object to contact the battery
terminals.
• Do not immerse batteries in liquid. Liquid may
create a short circuit and damage the battery. If
batteries are immersed, contact your service center
for proper handling.
• Do not place the battery into a pocket, tool pouch,
or tool box with conductive objects. Conductive
objects may create a short circuit and damage the
battery.
• Do not place a battery on moist ground or grass.
Moisture may create a short circuit and damage the
battery.
Failure to observe these precautions may result in
injury or property damage.
• This tool is not designed for continuous use. After
40 cutting cycles or if tool becomes hot, allow the
cutting tool to rest for 30 minutes.
• Do not secure this tool in a vice. This is a tool
designed for hand-held operation.
• This tool may be used in damp or wet environ-
ments; however, air-drying is recommended before
use if the tool becomes soaked. Damage may result
when the tool is operated prior to thorough drying
when electrical components are soaked.
• Use this tool for the manufacturer's intended
purpose only
Failure to observe these precautions may result in
injury or property damage.
• Do not store the battery at more than 122 F (50 C)
or less than -4 F (-20 C). Damage to the battery can
result.
• Do not attempt to open the battery. It contains no
user-serviceable parts.
• Do not use another manufacturer’s charger. Other
manufacturers’ chargers may overcharge and
damage the battery.
Failure to observe these precautions may result in
injury or property damage.
• Do not perform any service or maintenance other
than described in this manual. Injury or damage to
the tool may result.
Failure to observe these precautions may result in
injury or property damage.
Note: Keep all decals clean and legible, and replace
when necessary.
