854DX Electric Bender
Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
14
Service Instructions
(cont’d)
Control Board Unit
1. Remove outer control box (refer to previous
instruction).
2. Disconnect the power connections to the board
from the circuit breaker and power cord.
3. Disconnect the pendent receptacle cable.
4. Remove the three button head screws attaching
the control board assembly to the enclosure, and
remove the control board assembly.
5. Reassemble in reverse order.
Pendant Switch
1. Remove three screws holding the housing halves
together and separate.
2. Unplug the pendant cord from the circuit board and
remove strain relief from housing.
3. Remove the three screws and the circuit board.
4. Unplug the keypad from the circuit board.
5. Remove the three screws from the bottom housing
to remove the magnets.
6. Peel the keypad membrane from the top housing.
7. Reassemble in reverse order noting the following:
Clean all residue from the mounting surface.
