GB-10
E-Z-GO XI 340 / CUSHMAN TUG
SAFETY, OPERATORS & MAINTENANCE MANUAL
MAINTENANCE GUIDE
Check tire pressure.
Fill batteries to proper level and check specific gravity.
Wash battery tops free of dirt and electrolyte.
Remove and clean corroded wire terminals, battery terminals
and batteries. Reinstall wire terminals.
Use metal parts protector (Part No. 841192) to cover all elec-
trical connections and battery terminals.
AS REQUIRED
NOTICE
•
Be sure to make all connections prior to
using the metal parts protector, since it will
coat all open surfaces.
Perform previous services
Lubricate chassis*
Check differential lube level (EP)
Check master cylinder fluid level ± use DOT 3 brake fluid
EVERY 200 HOURS
EVERY 1000 HOURS OR YEARLY
Perform previous services
Change differential lube (EP)
Clean and repack front wheel bearings (PG)
Check motor brushes
PG ± Pressure gun grease
(lithium base)
EP ± Extreme pressure lube
SAE ± 80±90 Multigrade
BF ± Brake fluid DOT (3)
LUBRICATION CODE
CHASSIS LUBRICATION CHART
Perform every 200 hours
LUBRICATION AREA
NUMBER OF
LUBRICATION POINTS
OR FITTINGS*
1. Brake pedal pivot crank
1
2. Fork tube upper bushing & lower bearing 2
3. Fork pivot bushing
2
* Use a lithium based pressure gun grease on all
grease fittings and lubrication points.
CHASSIS LUBRICATION GUIDE
IMPORTANT
* TOW LINE ATTACHING POINTS
X JACKING LOCATIONS
BULBS
Description
Specification or
Trade No.
Cushman No.
BULBS
Headlight (accessory)
35 Watt
No. 4411
820594
(3000 CP)
Light, Stop, Tail
32±4 CP
No. 1157
822049
or
No. 2057
