Textron Cessna Citation 0258, Руководство по эксплуатации

Страница: 28 / 37

28
0258
Vanity Hot Water Tank Removal
A water tank is located in the bottom-center compartment of the vanity and is easily
removed for filling. The vanity switch panel controls the temperature of the heater
for the water tank (see previous page for switch operation).
Note: Make certain the hot water heater is “Off” before attempting to remove the
container from the vanity. See previous page for switch operation.
To remove and fill hot water tank:
1. Open bottom-center door of
the vanity.
2. A quick disconnect is
incorporated in the water line
for easy disconnection of
water line from tank. Press
on release button to
disconnect water line.
Warning: A red Landing
Gear Manual Activation
handle is also located within
the vanity cabinet. Take care
when disconnecting the water
line from the tank.
3. Lift up slightly on the front of
the hot water tank and slide
inboard to remove.
Caution: Be careful when
removing, hot water tank
may be HOT.
Unscrew Lid to Fill
Note: Door not shown for clarity.
4. Reverse order of steps 1
through 3 to reinstall.