Textron Cessna Citation 0258, Руководство по эксплуатации

Страница: 13 / 37

13
0258
AirCell Telephone
The AirCell Telephone provides voice, fax and data transmission capabilities during
flight. Use the system’s handset to perform all normal operations of the AirCell
Telephone. A backlit LCD screen shows telephone numbers, signal strength and AirCell
Telephone status. Use the keypad to enter phone numbers, menu selections, call
timer and other functions. For detailed information and instructions for using the
different services, refer to the AirCell User Manual.
Press to Increase Earpiece
Volume
Backlit LCD
Screen
Press to Release Phone
from Holder
Press to Decrease Earpiece
Volume
Press, then Use
S
and
T
to Increase
or Decrease Ringer Volume
Displays Telephone Numbers and
AirCell Telephone Status.
See Note Below.
Press to Display Active Telephone
Number or Recall Stored Number.
See AirCell User Manual for Details.
Press to Clear Last Digit Entered
on Keypad
Keypad.
Use to Enter Telephone Number
to be Called and Other
Functions. See AirCell User
Manual for Details.
Press to Turn AirCell
Telephone On/Off
Press to Store Telephone
Number or Name. See AirCell
User Manual for Details.
Press to Send (Connect) to Number
Entered on Keypad or Connect to
Incoming Call.
Press to End Call (Disconnect)
“One Touch Dialing” Keys. See AirCell
User Manual for Details.
Note:
§
In lower left hand corner of screen indicates AirCell Telephone
“On.”
InUse On lower part of screen indicates AirCell Telephone “In Use.”
To place an air-to-ground call:
1. Take handset from holder.
2. Press “PWR” to turn AirCell Telephone on.
3. Use keypad to enter 00 + country code (8816 to dial another Iridium
telephone) + area code and telephone number to be called. The number will
appear on the LCD screen.
4. Press “SND.” The telephone number will continue to display for approximately
one second before it is sent. For Credit-Card Billing: Press “0” + Area code +
Number.
5. If you misdial, press “CLR” to clear the digits and enter the number again.
6. When call is finished, press “END” to disconnect.
To receive an incoming call:
1. Take handset from holder.
2. Press “SND” to connect to incoming call.
3. When call is finished, press “END” to disconnect.
To use the handset as an internal intercom:
1. Take handset from holder.
2. Press “PWR” to turn AirCell Telephone on.
3. Press “FCN” key, then “7.” The other phones in the aircraft will ring.
4. When call is finished, press “END” to disconnect.