Textron Bell 212, Руководство по обслуживанию

Страница: 30 / 269

BHT-212-MM-1
5-00-00
26 JUN 2013 Rev. 14 Page 7 Export Classification C, ECCN EAR99
– Daily inspection — Accomplish daily before
flight operation.
– 100 hours/12 calendar months — Accomplish
each 100 hours of flight operation or
12 calendar months, whichever comes first.
– 1000 hours — Accomplish each 1000 hours of
flight operation.
– 3000 hours/5 years — Accomplish each
3000 hours of flight operation or each
60 calendar months, whichever comes first.
• Scheduled inspections — Part B consists of the
following:
– 25 hours/30 days — Accomplish each
25 hours of flight operation or each 30 days,
whichever comes first.
– 300 hours — Accomplish each 300 hours of
flight operation.
– 600 hours/12 months — Accomplish each
600 hours of flight operation or each
12 calendar months, whichever comes first.
– 3000 hours/5 years — Accomplish each
3000 hours of flight operation or each
60 calendar months, whichever comes first.
b. Special inspections are of a temporary nature
or of a special interval that is not consistent with the
scheduled inspections.
c. Conditional inspections do not occur at a
specified time. A conditional inspection is the result of
known or suspected unusual event, known or
suspected malfunctions, or defects.
d. An interim inspection occurs between
overhauls.
e. The component overhaul schedule gives the
elapsed operating time at which a component must be
removed, disassembled, examined for condition, and
overhauled, in accordance with data approved by Bell
Helicopter Textron.
2. Airworthiness limitations — Replace components
in accordance with Airworthiness Limitations Schedule
(Chapter 4).
3. Lubrication and servicing requirements are in
addition to those stated in this chapter (Chapter 12).
4. For corrosion control refer to the Corrosion
Control Guide, CSSD-PSE-87-001 and the
BHT-ALL-SPM.
5. For the PT6T-3/-3B engines, refer to the Pratt &
Whitney Canada Maintenance Manual for the
scheduled inspection, special inspection, conditional
inspection, and component overhaul schedule.
6. For the common Bell Helicopter Textron approved
optional equipment that is integrated into this
maintenance manual, refer to this chapter for the
scheduled inspection, conditional inspection,
component interim inspection, and component
overhaul inspection.
7. For all other Bell Helicopter Textron approved
equipment, refer to the applicable Service Instruction
for the scheduled inspection, special inspection,
conditional inspection, component interim inspection,
and component overhaul inspection.
8. For the inspection requirements for optional
equipment approved under Supplement Type
Certificate (STC), refer to the applicable STC
documentation. Maintenance and inspection of these
items are the responsibility of the owner/operator.
5-5. DEFINITIONS
• Inspect, check, examine — Determine condition
relative to an established standard.
• Condition — The state of being of an item as
related to serviceable or unserviceable standard.
• Security — The presence of attaching parts that
are properly tightened or appear to be, and the
presence of properly installed (as required)
locking devices such as lockwire, cotter pins, or
other.
• Standard — An established rule or measure to
determine condition.
• Damage — Physical deterioration whereby the
standard renders the condition or an item
acceptable or not acceptable for continuous use.