HW1 and HW1V Impact Wrenches
Greenlee / A Textron Company
9
Hoses and Fittings
Installation and Maintenance
3FGFSUPQVCMJDBUJPO4"&+
)PTFBOE)PTF"TTFNCMJFT
Replacement
3FGFSUPB(SFFOMFF6UJMJUZDBUBMPHPSQVCMJDBUJPO
-PX1SFTTVSF2VJDL$PVQMFST"EBQUFST
and Hoses.
%POPUEJTDPOOFDUUPPMIPTFTPSàUUJOHTXIJMF
the power source is running or if the hydraulic fluid is
hot. Hot hydraulic fluid could cause serious burns.
Hose Connections
Tool Port Identification
.BUDIUIFNBSLJOHTPOZPVSUPPMUPUIJTUBCMF
Pressure Port
Return Port
P
T
or
Connecting Hoses
1.
Move the flow lever on the hydraulic power source
to the OFF position.
4UPQUIFIZESBVMJDQPXFSTPVSDF
$POOFDUUIFSFUVSOIPTFUPUIFSFUVSOQPSUPOUIF
IZESBVMJDQPXFSTPVSDFBOEUIFOUPUIFSFUVSOQPSU
on the tool.
4.
$POOFDUUIFQSFTTVSFIPTFUPUIFQSFTTVSFQPSUPOUIF
UPPMUIFOUPUIFQSFTTVSFQPSUPOUIFIZESBVMJDQPXFS
source.
Disconnecting Hoses
1.
Move the flow lever on the hydraulic power source
to the OFF position.
4UPQUIFIZESBVMJDQPXFSTPVSDF
%JTDPOOFDUUIFQSFTTVSFIPTFGSPNUIFIZESBVMJD
QPXFSTPVSDFBOEUIFOGSPNUIFUPPM
%JTDPOOFDUUIFSFUVSOIPTFGSPNUIFUPPMBOEUIFO
from the hydraulic power source.
5.
Install dust caps over the ports to prevent
contamination.
Typical Setup
www.
.com
1.800.561.8187
