Textron 614212 2010, Руководство пользователя и сервисное руководство

Страница: 33 / 58

OPERATION AND SERVICE INFORMATION
Page 23
Owner’s Manual and Service Guide
Read all of Manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Dangers and Warnings
Keep hands, clothing and jewelry away from
moving parts. Use care not to contact hot
objects. Raise the rear of the vehicle and
support on jack stands before attempting to
run the engine.
Preparing the engine for a prolonged storage period (30
days or more) calls for a few simple steps to prevent a
build up of varnish and gum in the carburetor and corro-
sion in the engine.
•
Raise the rear of the vehicle and support on jack
stands. Refer to ‘Lifting the Vehicle’ for proper lift-
ing procedure and safety information.
•
Disconnect the fuel hose at the fuel tank and plug
hose.
•
With proper ventilation, depress the accelerator
pedal and allow engine to run until it stops due to
lack of fuel.
•
Remove spark plug and pour about 1 oz. (30 ml)
of engine oil into the cylinder. Replace spark plug,
ground spark plug wire and use starter to turn
engine over a few seconds to distribute oil.
•
Add a gasoline additive to the tank in accordance
with the manufacturer’s recommendations.
•
Reattach fuel line to tank and drive the vehicle for
several minutes to circulate the additive through
the carburetor.
•
While engine is still warm, change oil.
•
Clean body, chassis and engine of debris, mud,
chaff or grass.
CAPACITIES AND
REPLACEMENT PARTS
Fig. 32 Capacities and Replacement Parts
Fuel Tank / Fuel
Engine Oil
Oil Filter
Air Filter
Spark Plug
Starter/Generator Belt
Clutch Belt
Rear Axle Oil
5.3 gal (20.0 liters) / 87 Octane Min
1.4 US qt (1.3 liters)
51 oz (1.5 liters) / SAE 30
P/N 607454
P/N 28463G01
NGK BPR2ES (P/N 607462)
.028” - .031" (.7 mm - .8 mm) Gap
P/N 26414G1
P/N 618630