18
6-2. Output Functions
Function: When the MAIN OUTPUT key is turned on the channel with its OUTPUT SELECT LED lit
is turned on.
CAUTION
:
Make sure that wires are connected with the output terminals firmly before pressing the
MAIN OUTPUT key.
6-2-1. Method of turning on or off the output with the MAIN OUTPUT key
Operation procedures
1. When the OUTPUT SELECT key is pressed, the lamp lights green.
2. Turn on the MAIN OUTPUT key. The output is turned on.
3. When the MAIN OUTPUT key is pressed again, the key goes out and the outputs of all channels
are turned off.
6-2-2. Method of turning on or off the output with the OUTPUT SELECT key
・
If the off OUTPUT SELECT key is pressed while the MAIN OUTPUT key is on, the output is
turned on. The lamp is lit in green in the CV operation mode or in red in the CC operation mode.
・
If an OUTPUT SELECT key that is lit in green (or red) is pressed while the MAIN OUTPUT key is
on, the LED of the pressed key goes out and the channel of that LED is turned off.
6-3. Memory Function
Function: It is possible to store the set voltage and current and recall them. The set voltage and
current values are stored in PRESET. It is also possible to store the key settings when
power is turned on.
<Precautions>
・
It takes approximately 0.3 seconds to store the set voltage and current in the preset memory.
Operations of all keys, rotary encoder and external contact control are disabled in this period.
