TEXIO DL-1060, Инструкция по эксплуатации

Страница: 88 / 146

82
3.4.5 Initial Mode
The section contains two selections: “DEFAULT” and “SAVE DATA”. You can select
“SAVE DATE” to save the current configuration or select “DEFAULT
SET ” to restore the
factory value after restarting DL-1060. The valid range of “SAVE DATA” is listed in
Table 3-5 .
Table 3-5
No. Items of Save Data Contents
1 Continuity Threshold Resistance
2 Diode Boundary Voltage
3 Temperature (RTD)
Sensor
、
Types
、
Units
、
USER define
、
SPRTD
4 Thermocouple Types, Units, R Junction
5 dBm Reference Resistance
6 MX+B Values: M, B
7 Reading Hold Sensitivity Band
How to save the settings
1. Do the procedure SHIFT + CONFIG > SYSTEM > ENTER > INIT MODE > ENTER >
“SAVE DATA” / “DEFAULT SET” > ENTER to save your current setting or to resume
the default setting as shown in Figure 3-36 .
Figure 3-36