texet DVR-3GP, Быстрый старт

Страница: 6 / 64

2) To switch between files, use
UP/DOWN
buttons;
Note: Photos are displayed on the entire screen without any icons/panels.
3) To view video, press REC/OK ;
4) To return to the list of files (6 files in the screen), press MODE .
Menu settings mode
To switch over between modes, use the
MODE
button;
1) To switch over between the menu items, use UP/DOWN buttons;
2) To make changes to the parameter settings, use the REC/OK button;
3) To save the changes and exit the menu, use the MODE button.
Resetting the device
If the DVR does not start, does not react to your actions, try to restart it by press-
ing the «Reset» .
Firmware
ATTENTION! Correct work after the firmware can only be in compliance with all
regulations.
It is prohibited:
1) Perform the firmware upgrade of the uncharged device;
2) Stop and restart the device, disconnect the power adapter/remove the battery
during the firmware upgrade;
3) Install the software downloaded from other than the official website of the man-
ufacturer;
4 ) Apply the update software, patches overclocking the CPU or the memory unit.
If you are not sure in your abilities, refer to an authorized service center to up-
grade the unit firmware. SC list is available at the manufacturer’s address
http://www.texet.eu .
WARNING!
The company teXet Global SE is not responsible for the unauthorized
unit firmware upgrade. Unauthorized firmware upgrade is a reason for denying the
warranty. All files spread on the official website are for use by authorized service
centers with all necessary equipment, additional software, as well as experience
and expertise.
Update process
For firmware, a memory card compatible with the model of DVR is needed.
1) Charge the register (at least the first division on the battery icon on the screen);
2) Reset «default» setup in the DVR menu;
3) Download the firmware file from the official site http://www.texet.eu;
4) Copy the firmware file texet.bin to the memory card root;
5) Insert the memory card into the register and turn it on;
6) You will see an icon with animation in a circle - wait until the installation is fin-
ished; the register will turn off automatically;
ENG
5
DVR.indd 5 16.01.2014 13:31:32