Waste Emptying:
1. When you empty the waste bin, please make sure the shredder is switched off and
unplugged.
2. Place the Waste Bin back into the shredder, ensuring it is done correctly otherwise it will
not work.
Paper can easily wrap around the shredder blades if the waste bin is allowed
to get too full, therefore please empty the waste bin after shredding approx
85 A4 Sheets.
Disposal:
Please dispose of this product responsibly at an approved disposal site or recycling facility.
Do not dispose of this product in household waste.
TROUBLE SHOOTING
Troubles
Reason
Solution
Shredder does
not work after
paper is
inserted.
1. The power cord may not be
properly connected.
2. The motor has been over
heated.
3. The paper feed may be
jammed.
4. Waste Bin not replaced
correctly after emptying..
1. Check the power cord is correctly
plugged in both the plug socket and the
shredder.
2. Wait for about 30 minutes and try the
shredder again.
3. Reverse the paper feed and remove any
jammed paper, then try again.
4. Check Waste Bin has been put back
correctly.
Shredder does
not stop after
shredding has
finished
1. The mechanical sensor may
be jammed by paper
1. Clean the paper entry and try again,
ensuring you remove the plug from the
socket first.
Shredder
makes a high
noise
1. The shredder may not be
placed on a flat/stable surface.
1. Replace the shredder onto a flat/stable
surface.
Shredder does
not shred paper
1. Too much paper is inserted.
2. The paper size inserted may
be larger than the paper entry.
3. The paper may be inclined
when placed into the paper
entry.
1. Check to see if you have exceeded the
rated capacity of paper (12 sheets of 70 g).
2. Reverse the shredder and take out the
paper, fold in half and try again.
3. Re-insert the paper vertically.
