Thank you for purchasing the TEXET Cross Cut Shredder CC3L-DT, with normal use and
maintenance, your shredder will provide years of satisfactory performance.
To protect this Shredder correctly and avoid any damage, please
ensure you understand the following Icons:-
Please keep clothes, ties and the like away from the paper entry slot.
To prevent damage to the cutters remove paper clips, and other
fasteners before shredding.
Please keep your hands out of the paper entry slot as the sharp blades
may cause injury.
Please keep your hair away from the shredder/paper entry slot.
Please keep children away from the Shredder, the sharp blades may harm
them.
Please do not spray any flammable gas, water or oil onto this Shredder.
The incorrect operation of this appliance may cause personal injury or damage the shredder.
The Plug Socket outlet should be easily accessible. BS Plug 3A Fuse fitted.
GENERAL SAFETY
When using electrical appliance, basic precautions should always be followed to reduce the
risk of fire, electrical shock and injury to persons including the following;
The Shredder is only intended for private/domestic and small office use. Any other uses not
recommended by the manufacture, may result in the warranty being void.
Do not use the shredder to shred film, OHP Pouches, adhesive stickers, or any plastics, other
that credit cards, as these may cause damage.
Remove the Shredder from its packaging and check to make sure it is in good condition before
using. Keep the packaging for storage and transportation.
This Shredder is not intended for use by persons, including children, with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the Shredder by a person responsible
for their safety.
Extreme caution is necessary where children or persons with reduced physical, sensory or
mental capabilities may come into contact with the Shredder when in use.
Do not let children play with parts of the packaging, such as plastic bags.
Ensure the power supply to the socket into which the Shredder is plugged, is in accordance
with the rating label on the shredder and that the socket is earthed.
Do not use the Shredder if the Power Cord is damaged. If the Power Cord is damaged it must
be replaced by a recognized service agency or other qualified person.
Always turn the Power off before unplugging the Shredder and make sure your hands are dry
to prevent electric shock.
Always unplug the Shredder when not in use.
