User Guide
INS046-8
5
To RESET During an Alarm Activation
To silence the alarm
enter your 4 digit code
!!!!
. The internal
and external sounders will stop but the external strobe will continue to
flash. The display will flash the zone light of the zone which first caused
the alarm activation and illuminate the zone lights of all subsequently
opened zones (if any). To cancel the display and stop the external
strobe
press
*
. The system will chime and return to unset.
To RESET After an Alarm Activation
After an alarm activation the internal and external sounders will stop
after a pre-set time. The system will re-arm but the external strobe will
continue to flash.
Enter via a designated entry route.
The entry tone
will start.
Enter your 4 digit code
!!!!
. The system will unset and
the entry tone will stop. The display will flash the zone light of the zone
which first caused the alarm activation and illuminate the zone lights of
all subsequently opened zones (if any). To cancel the display and stop
the external strobe
press
*
. The system will chime and return to
unset.
If the System Requires an Anti-Code After an Alarm Activation
The system may be programmed to require an Anti-Code after an alarm
activation. You will still be able to silence the alarm by entering your
code as normal. However you will not be able to reset the system
without first obtaining the Anti-Code. The zone lights will display a
random 4 digit sequence. They will flash each digit in turn and then
pause before repeating. Contact the phone number on the last page
with this sequence in order to obtain a 4 digit Anti-Code which will allow
the system to be reset.
To display the zone(s) which caused the alarm
press
*
. The
zone light of the zone which first caused the alarm activation will
flash, and the zone lights of all subsequently opened zones (if any)
will illuminate. To return to the random sequence display
press
*
again.
The CHIME Facility
When the system is unset it is possible to set one or more zones to
Chime. When a zone is set to Chime the control panel will sound a tone
whenever the zone is entered.
!
