Texas SNOWBUSTER 650E, Руководство пользователя

Страница: 39 / 52

The snow blower can be operated either with a two-wheel drive (delivery condition) or a single-wheel
drive to make it easier to control the plow.
Proceed as follows to change from a two-wheel to a single-wheel drive:
 Ensure that the engine is switched off.
 Replace the safety split pin from the left wheel (Fig.31).
 Now insert the safety split pin into the outer hole in the axle (Fig.32) so that the wheel can turn
freely on the axle.
 Repeat the procedure to get back to the two-wheel drive version, follow the above instructions
in reverse order.
Important! Check that the skids (Fig.22/ Item 10) are correctly adjusted. The skids should be adjusted
so that the auger unit is just above ground level.