Sparking plug : After every 25 working hours the sparking plug shall be carefully cleaned.
Also inspect electrode distance, which can be 0,5 mm.
Air filter : After every 25 working hours the filter and net filter shall be carefully cleaned
with gasoline. Dry and resemble the filters. The sponge filter shall be wetted with oil. If it is
very dusty this shall be done every time you have used the earth auger.
Screws and bolts : After every 25 working hours these shall be tightened.
Muffler : Inspect the muffler after every 50 working hours. Clean and remove the exhaust.
Don t let dust and exhaust get into the cylinder house.
Reduction gearbox : After every 50 working hours the oil shall be replaced.
A.
Remove the 6 screws at the gear box and open it
B.
Remove the surplus lubrication and replace with 200- 250 g. new grease. Use grease
which is appropriate for 120
0
to 170
0
C.
C.
Close the gear box with screws and tighten the screws.
The drill : Inspect the drill and edge on a regular basis.
STORAGE
If you don t need the earth auger for a longer period of time you shall take the following
precuations.
A.
Empty the fuel tank and start the engine. Let the engine run until it has used the
remaining gasoline.
B.
Remove the sparking plug and pour one teaspoon oil into the cylinder housing. Pull in
the starting cord in order to spread the oil in the cylinder. Thereafter put the sparking
plug back in its place.
C.
Carefully clean the machine and lubricate the not-painted metal parts in oil.
D.
Store the machine in a dry place protected against dust.
TROUBLE SHOOTING
In case you can t start, loose speed or the engine suddenly stops you shall check the
following:
A.
Is the tank filled with gasoline.
