Texas mini tex 200, Инструкция по эксплуатации

Страница: 12 / 35

12
Cleaning of filter:
Clean the filter sponge in hot water with detergent. Then press (do NOT wring) the sponge, until all dirt has been
removed.
Rinse the filter in clean water.
Wrap it in a clean towel and press (do NOT wring) until the sponge is completely dry.
Apply a little oil (standard engine oil) to the filter and press the sponge to spread the oil.
SPARK PLUG
Replace the spark plug if the electrode is burnt or if the porcelain is broken.
For Power Line 1E34FC, use Denso W22MPR-U or a compatible model.
Product number: 10011022
The correct electrode distance is 0.7 mm.
Fitting the blades
Remember that the left and right sides of Right Left
the machine are determined by the user
standing behind the machine.
Remember to stop
the motor!
D C B A
Storage
If the machine is not to be used for a longer period, the following precautions should be taken. This will ensure a
longer working life.
Empty the fuel tank. Run the motor until the carburettor is completely empty (the motor stops by itself). If fuel is left
in the tank for a longer period, any impurities in the petrol can clog the carburettor, which can result in harder
starting, loss of performance, etc.
Remove the spark plug. Pour a couple of drops of motor oil down the spark plug hole. Pull the start cord 4-5
times and replace the spark plug. Pull the start cord slowly until you feel some resistance. This closes the fuel
and exhaust valves and prevents corrosion in the cylinder.
Wipe the surface with an oily cloth.
Always store the machine in a dry, clean place.
Technical specifications
Motor Power Line 1E34FC
Motor size 25.0 cm
3
Max. performance 1.2 HP/0.9 KW
Revolutions per minute 8000 rpm
Starter Recoil start
Tank capacity 1.0 l
Fuel consumption 1.0 l/h
Octane number/2-stroke unleaded 95 mixed w/oil
Length
700 mm
Width incl. blades 240 mm
Height 1100 mm
Weight when dry 12 kg
Blade rotating speed 250 rpm
Noise level L
PA
RE.1PW 96 dB(A)
L
WA
85 dB(A)
Vibration level 8.1 m/s
-2