www.texas.dk
16
Rotation of handle
To give you best and most ergonomic way of trimming
your hedge the handle can be rotated by 90 degrees
to the right or the left.
Press the handle (1) on top of the handle bar.
Then press down the lock handle (2) while at the
same time turning the handle to the left or right.
Do not press the throttle when rotating handle!
Maintenance
Maintenance before and after use.
-
Remove any leaves or branches and dirt from the machine.
-
Check for any loose or missing parts. Fasten any loose parts.
-
Check for any leakage from the fuel system.
-
A dirty air filter makes it difficult to start the engine and lessens the performance of
the engine. Check for any dirt in the filter.
-
Clean the air filter in warm soap water. It must be completely dry, before 2-stroke
engine oil is applied.
The air filter must be soaked in 2-stroke engine oil. Press out any surplus oil.
Check that the air filter cover closes tightly.
Notice that the gearbox must be oiled.
On delivery it is oiled, but it may be necessary to re-oil.
The gearbox must be ¾ filled.
The amount should be controlled at least once
a year.
Use the grease nipple below the air filter for greasing.
Use grease type:
MULTIFAK EP-0
Spark plug
This machine is equipped with a spark plug, with an electrode distance of 0,6-0,7 mm.
For optimal performance it should be replaced once a year.
Find correct spark plug in the spare part drawing/list at www.texas.dk
