Texas GBV 260, Руководство пользователя

Страница: 12 / 17

12
and pull the starter handle until the engine starts.
How to start a warm engine
1. Set the choke lever to “RUN” position, see pos. E:
2. Pull the start cord until the engine runs.
How to stop the engine
1. Release the throttle button.
2. Set both switches to “STOP” position, see pos. 1
Adjusting the idle speed
First, check that the air filter is clean, as it can affect the
result.
When the idle speed is correct, the fan should not
move, when machine is idling.
If adjustment is required, the idle screw (1) can be
adjusted. See Fig. 8,
Follow below procedure:
1. Close (turn counter clockwise) the idle adjustment
screw, with the engine running, until the cutting
attachment starts to rotate.
If the ildle speed cannot be adjusted so that the cutting
blade stops mowing. Contact your dealer/service
center. Do not use the machine until it has been
correctly adjusted or repaired.
Maintenance
•
Maintenance before and after use:
•
Remove any leaves or branches and dirt from the
machine.
•
Check for any loose or missing parts. Fasten any
loose parts.
•
Check for any leakage from the fuel system.
•
A dirty air filter makes it difficult to start the
engine and lessens the performance of the
engine. Check for any dirt in the filter.
•
Clean the air filter in warm soap water. It must
be completely dry, before 2-stroke engine oil
is applied.
The air filter must be soaked in 2-stroke engine oil.
Press out any surplus oil. Check that the air filter
cover closes tightly
Spark plug
This machine is equipped with a spark plug,
with an electrode distance of 0.6-0.7 mm. For
optimal performance it should be replaced
once a year.
Find the spark plug in the spare part drawing/list at
www.texas.dk (part. no. 427517)
Storage
1. Empty all fuel into a can approved for petrol.
Let the engine run until it stops.
2. Clean the knives, store them frost free and out
of reach for children.
3. Observe all safety precautions concerning safe
storage and handling of petrol.