Texas EKO 370 LI, Инструкция по эксплуатации

Страница: 11 / 17

11
Safety instructions
Please follow the safety instructions provided in this manual and ensure that you fully understand
all safety instructions. Please keep this manual for future reference or in preparation for resale.

Always switch off the mower before charging the battery directly to the power socket.

All spectators should be kept at a safe distance to the machine, when it is in use.

The operator of the machine is responsible for people’s safety.

People under the influence of alcohol, drugs are not allowed to use the machine.

Only use the machine for its designed purposes.

Always use the machine with the collector box attached.

Keep hands and feet away from all rotating and moving part. Blade etc.

The operator must wear boots with non-slip soles to ensure that you have a good a
foothold.

Always wear safety glasses and avoid loose-fitting clothes.

Do not overload the appliance work load by attempting to mow at a too fast a rate.

Caution! The blade does not stop immediately after switching off.

Always switch off the machine, disconnect the key and wait until the blade stops before
carrying out maintenance or cleaning work.

It is forbidden to modify any electrical and mechanical parts for safety reasons.

Thoroughly inspect the area, where the equipment is to be used. If necessary remove
foreign objects

After striking a foreign object, stop the engine immediately and inspect the machine
thoroughly for damage. Repair the damage before continuing

If the machine should start to vibrate abnormally, Stop and remove the ignition key from the
mower and check immediately for the cause. Vibration is generally a warning of damage.

Replace worn or damaged parts for safety. Use only original spare parts. Parts not
produced by manufacturer may cause poor fit and possible injury.
Electrical safety

Protect yourself against electric shocks. Never open the battery or the charger.

Do never connect a damaged charger cable to the power supply.

Do not touch a damaged cable before it is disconnected from the power supply.

Never bypass protective devices or deactivate them.

Repairs on the electrical parts of the machine must be carried out by an electrician or of our
customer service points.

Damaged power socket cables must be replaced by the manufacturer or a similar qualified
professional to prevent dangers.
Repairs to other parts of the machine must be carried out by the manufacturer or one of his
customer services. Use only original spare parts, accessories and special accessory parts.
Accidents can arise for the user through the use of other spare parts. The manufacturer is not
liable for any damage or injury resulting from such action
.