Texas Instruments VLYNQ Port, Руководство пользователя

Страница: 25 / 49

www.ti.com
3 VLYNQ Port Registers
VLYNQ Port Registers
Table 5 describes the address space for the VLYNQ registers and memory.
Table 5. VLYNQ Register Address Space
Block Name Start Address End Address Size
VLYNQ Control Registers 01E0 1000h 01E0 11FFh 512 bytes
Reserved 01E0 1200h 01E0 1FFFh -
VLYNQ Remote Memory Map 0C00 0000h 0CFF FFFFh 64 Mbytes
Table 6 lists the memory-mapped registers for the VLYNQ port controller. See the device-specific data
manual for the memory address of these registers.
The first 128 bytes map to the VLYNQ configuration registers that are maintained by the local (device)
VLYNQ register control module while the second 128 bytes map to the remote configuration registers that
are physically located in the remote device linked by the VLYNQ serial interface. Any access to the
second set of registers causes VLYNQ to issue a read or write VLYNQ packet to be transmitted and only
completes if a link is established between the two devices.
Table 6. VLYNQ Port Controller Registers
Offset Acronym Register Description Section
0h REVID Revision Register Section 3.1
4h CTRL Control Register Section 3.2
8h STAT Status Register Section 3.3
Ch INTPRI Interrupt Priority Vector Status/Clear Register Section 3.4
10h INTSTATCLR Interrupt Status/Clear Register Section 3.5
14h INTPENDSET Interrupt Pending/Set Register Section 3.6
18h INTPTR Interrupt Pointer Register Section 3.7
1Ch XAM Transmit Address Map Register Section 3.8
20h RAMS1 Receive Address Map Size 1 Register Section 3.9
24h RAMO1 Receive Address Map Offset 1 Register Section 3.10
28h RAMS2 Receive Address Map Size 2 Register Section 3.11
2Ch RAMO2 Receive Address Map Offset 2 Register Section 3.12
30h RAMS3 Receive Address Map Size 3 Register Section 3.13
34h RAMO3 Receive Address Map Offset 3 Register Section 3.14
38h RAMS4 Receive Address Map Size 4 Register Section 3.15
3Ch RAMO4 Receive Address Map Offset 4 Register Section 3.16
40h CHIPVER Chip Version Register Section 3.17
44h AUTNGO Auto Negotiation Register Section 3.18
SPRUE36A – September 2007 VLYNQ Port 25
Submit Documentation Feedback