Test Procedure
7
Test Procedure
7.1
Download Firmware Code to UCD3138A64EVM-660
Use the following steps to download the firmware code:
1. Set up the EVM connection based on
. The LED of the USB adapter lights.
2. Use provided jumper and jump across J4. The LED of the EVM lights.
3. Launch the UCD3xxx/UCD9xxx device GUI following the steps described in
. A window
shown in
appears.
4. Click
Firmware Download
; then a new window appears as shown in
. Click
Select File
and
browse an intended firmware code file with file extension
.x0
, for example,
cycloneA64.x0
; then click
Download
. The firmware of
cycloneA64.x0
is downloaded to the UCD3138A64 device on the
UCD3138A64CEVM-660 EVM. When prompted, click
Yes
to complete the download. Click
Close
to
exit the download window.
5. After the firmware code downloads to the UCD3138A64 device, the intended test can be performed.
Figure 5. UCD3xxx/UCD9xxx Device GUI
10
Control Card in Digitally Controlled Off-Line Isolated Power Converters
SLUUB53 – July 2014
Copyright © 2014, Texas Instruments Incorporated
