Texas Instruments UCC5390SCD, Руководство пользователя

Страница: 5 / 34

www.ti.com
General Overview
5 SLLU282A – December 2017 – Revised February 2018
Submit Documentation Feedback
Copyright © 2017–2018, Texas Instruments Incorporated
UCC5390SCD With Isolated Bias Supply
2.2 I/O Description
Table 1 lists the connection descriptions.
Table 1. Connection Descriptions
Pin Description
VCC1 VCC positive input. Powers driver and bias ICs, uses 3-V to 5.5-V range
GND1 Ground and reference plane, VCC, IN+, and IN– negative input
IN+ Non-inverting input of driver IC
IN– Inverting input of driver IC
S Source connection to external FET in TO-220 or TO-247 package
G Gate connection to external FET in TO-220 or TO-247 package
D Drain connection to external FET in TO-220 or TO-247 package
3 Electrical Specifications
Table 2 shows the electrical parameters of the UCC5390SCDEVM-010.
Table 2. UCC5390SCDEVM-010 Electrical Specifications
PARAMETER TEST CONDITIONS MIN NOM MAX UNIT
INPUT CONDITIONS
Primary input
supply voltage
(Vcc1) 3 5.5 V
Input signal rising
threshold 0.7 × Vcc1
Input signal falling
threshold 0.3 × Vcc1
OUTPUT CONDITIONS
Gate drive
voltage Depends on Vcc1 11 33 V
Source current 10 17 A
Propagation
delay 10 17 ns
Drive power At 25°C 0.8 W
SYSTEM CHARACTERISTICS
CMTI 100 V/ns
Basic isolation 3 kVrms
Capacitance
through isolation 5 pF
Operating
ambient –40 25 85
Board size Length × width × height 1.5 × 0.83 × 0.3 1.5 × 0.83 × 0.3 1.5 × 0.83 × 0.3 inch
Drive area size Length × width × height 0.95 × 0.83 × 0.3 0.95 × 0.83 × 0.3 0.95 × 0.83 × 0.3 inch
4 Detailed Description
The following sections provide a detailed description of the EVM.