Setup
2.
Place the TSU6721EVM on top of the LaunchPad (see
) so that all connectors on J1 and J2
of the LaunchPad are inserted into J8 and J9 of the TSU6721EVM and the mini-USB connectors on
both boards are facing the same direction.
Figure 3. Proper Orientation for the TSU6721EVM on the LaunchPad.
3. The following jumper configurations on the TSU6721EVM are required for power to be supplied from
the LaunchPad:
(a) J2: 3V3 to VBAT
(b) J4: 3V3 to VDDIO
4. Download the firmware (for the MSP430) and graphical user interface (GUI) software in a zipped folder
located on the
webpage on
.
5. Extract the zip folder.
6. Plug the MSP430 LaunchPad into the computer.
6
TSU6721EVM Micro-USB Switch Evaluation Module
SLVUA77 – May 2014
Copyright © 2014, Texas Instruments Incorporated
