Setup
6.
Click
Read All
. When the micro-USB cable is attached to the PC, the GUI looks like
. Notice
the change in register 0x0A, where the SDP bit has gone high after detection.
Figure 7. TSU6721EVM GUI Showing SDP Charger Detection
7. Disconnect the micro-USB cable from the PC.
8. The TSU6721EVM GUI can write to each register specified as
Read/Write
in the TSU6721 datasheet.
Click on register 0x02, bit 2 (Manual SW). The box turns grey, which means that 0x02 bit 2 has been
set to 0.
12
TSU6721EVM Micro-USB Switch Evaluation Module
SLVUA77 – May 2014
Copyright © 2014, Texas Instruments Incorporated