2.6.2
Command Dialog
EVM + PC
www.ti.com
Open the command dialog (View->Command
…
) to write, edit, load, save and run command scripts.
Command scripts are text files that contain commands to communicate with the TSC2117. The syntax is
described in
Figure 4
.
Figure 4. Command Dialog
•
The main area of the command dialog is command buffer (editable text) which contains the command
script. To run the command script, click the Run button.
•
The smaller read only text area on the right side of the command dialog displays control data read
from the TSC2117. The Clear button clears the Read Data field.
•
The one line text edit field on the left bottom allows single command execution.
•
The Record check box enables recording of commands generated by the control software.
Figure 4
shows a recording of the volume control for the left Class-A/B HP Driver amplifier (note that the
Record checkbox is checked).
A single command to read four bytes starting at address 0x28 was executed and the result is displayed in
the Read Data field.
TSC2117EVM-K
8
SLAU282 – April 2009
Submit Documentation Feedback