Texas Instruments TPS65313-EVM, Руководство пользователя

Страница: 1 / 42

Warning Warning Hot surface.
Contact may cause burns.
Do not touch!
1 SLDU028A – January 2018 – Revised March 2020
Submit Documentation Feedback
Copyright © 2018–2020, Texas Instruments Incorporated
TPS65313-EVM User’s Guide
User's Guide
SLDU028A – January 2018 – Revised March 2020
TPS65313-EVM User’s Guide
The TPS65313-Q1 device is a power management integrated circuit (PMIC) for safety-relevant automotive
applications. This device integrates a wide-input voltage off-battery buck regulator (BUCK1), a low-voltage
buck regulator (BUCK2), and a 5-V boost converter (BOOST). The TPS65313-Q1 device integrates
protection features such as independent voltage monitors, overtemperature protection, watchdog function,
and built-in analog and digital diagnostic tests. The features of the device target safety-relevant
applications with system-safety requirements up to ASIL-C level.
This user's guide provides instructions to power up and evaluate the TPS65313-Q1 device using the
TPS65313-EVM evaluation module (EVM) and software user interface (TPS65313 GUI).
Contents
1 TPS65313-EVM Top View With Basic External Connections
.........................................................
3
2 TPS65313-EVM Input, Output Voltages, and Load Current Requirements
..........................................
3
3 TPS65313-EVM Jumper Settings
.........................................................................................
4
4 TPS65313-EVM GUI Installing and Opening the GUI
..................................................................
5
5 TPS65313-EVM Power-Up and Power-Down Procedure
.............................................................
6
6 TPS65313 GUI
...............................................................................................................
6
7 TPS65313-EVM Typical Plots
............................................................................................
12
8 TPS65313-EVM Schematic Diagram
....................................................................................
18
9 TPS65313-EVM Part List
.................................................................................................
21
10 PCB Layer Diagram
........................................................................................................
28
11 Description of the Watchdog Algorithm Implemented on EVM
.......................................................
34
List of Figures
1 EVM Top-View Diagram With Basic Connections
......................................................................
3
2 TPS65313-EVM GUI Installation Sequence
.............................................................................
5
3 TPS65313-EVM GUI LabVIEW RTE Installation Selection
............................................................
5
4 TPS65313 GUI Device Controls Page
....................................................................................
7
5 Watchdog Window Timing Diagram
.......................................................................................
9
6 Updated Figure 6. TPS65313 GUI Register Map Page TPS65313 GUI Register Map Page
....................
10
7 TPS65313 GUI EEPROM Programming Page
.........................................................................
11
8 Jumper Settings for EEPROM Update
..................................................................................
12
9 BUCK1 Efficiency Plot for V
IN
= 13 V
....................................................................................
12
10 BUCK2 Efficiency Plot
.....................................................................................................
12
11 BOOST Efficiency Plot
....................................................................................................
12
12 Power Up Showing Regulator Outputs and VREG
....................................................................
13
13 Power Up Showing Regulator Outputs and WAKE
....................................................................
13
14 Regulators Start-Up showing NRES with short NRES extension delay
............................................
13
15 Regulators Start-Up showing NRES with long NRES extension delay
.............................................
13
16 Power Down Showing Regulator Outputs and VREG
.................................................................
14