Powering Up the EVM - Software Control
www.ti.com
6
SLVU548A – October 2011 – Revised November 2017
Submit Documentation Feedback
Copyright © 2011–2017, Texas Instruments Incorporated
TPS65185 Evaluation Module
6.2
GPIO/I
2
C Controls Tab
Use this page to change the I
2
C interface data rate and SDA/SCL pullup resistors which are built into the
USB interface adapter.
This tab also provides controls for the VCOM_CTRL, PWRUP, and WAKEUP pins. Please note that the
jumpers JP1, JP2, and JP3 must be removed to control the pins through the GUI.
Figure 5. GPIO/I
2
C Control Tab
Figure 6. JP1, JP2, and JP3 Must Be Removed Before Using the GUI GPIO Control
