Texas Instruments TPS54233, Руководство пользователя

Страница: 13 / 19

4.2 Bill of Materials
Table 4-1 presents the bill of materials for the TPS54233EVM-373.
Table 4-1. TPS54233EVM-373 Bill of Materials
Count RefDes Value Description Size Part Number MFR
0 C1 Open Capacitor, Ceramic 1206
1 C2 10 μF Capacitor, Ceramic, 25V, X5R, 10% 1206 GRM31CR61E106KA
12 muRata
0 C3 Open Capacitor, Ceramic 0603
1 C4 0.1 μF Capacitor, Ceramic, 16V, X7R, 10% 0603 Std Std
1 C5 0.015 μF Capacitor, Ceramic, 16V, X7R, 10% 0603 Std Std
2 C6, C7 220 pF Capacitor, Ceramic, 16V, X7R, 10% 0603 Std Std
1 C8 470 μF Capacitor, Aluminum, 10V, ±20% 0.328 x 0.328
inch EEVFK1A471P Panasonic
1 D1 B230A Diode, Schottky, 2A, 40V SMA B240A Diodes Inc
2 J1, J4 ED1514 Terminal Block, 2-pin, 6-A, 3,5mm 0.27 × 0.25
inch ED1514 OST
2 J2, J3 PTC36SA
AN Header, 2-pin, 100mil spacing, (36-pin strip) 0.100 × 2 PTC36SAAN
1
L1
15 μH Inductor, SMT, 3.7A, 41 mΩ 0.402 × 0.394
inch MSS1038-273NL Coilcraft
1 R1 332k Resistor, Chip, 1/16W, 1% 0603 Std Std
1 R2 68.1k Resistor, Chip, 1/16W, 1% 0603 Std Std
1 R3 30.9k Resistor, Chip, 1/16W, 1% 0603 Std Std
1 R4 0 Resistor, Chip, 1/16W, 1% 0603 Std Std
1 R5 10.2k Resistor, Chip, 1/16W, 1% 0603 Std Std
1 R6 3.24k Resistor, Chip, 1/16W, 1% 0603 Std Std
0 R7 Open Resistor, Chip, 1/16W, 1% 0603 Std Std
3 TP1, TP3,
TP5 5000 Test Point, Red, Thru Hole Color Keyed 0.100 × 0.100
inch 5000 Keystone
3 TP2, TP4,
TP6 5001 Test Point, Black, Thru Hole Color Keyed 0.100 × 0.100
inch 5001 Keystone
1
U1
TPS5423
3D IC, DC-DC Converter, 28V, 2A SO-8 TPS54233D TI
1 — PCB 2.0" x 2.0" x
0.062" HPA373 Any
1 — Shunt, 100-mil, Black 0.100 929950-00 3M
Note
1. These assemblies are ESD sensitive, ESD precautions shall be observed
2. These assemblies must be clean and free from flux and all contaminants. Use of unclean flux is
not acceptable.
3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.
4. Ref designators marked with an asterisk ('**') cannot be substituted. All other components can be
substituted with equivalent MFG's components.
5 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision * (November 2008) to Revision A (October 2021) Page
• Updated the numbering format for tables, figures, and cross-references throughout the document. ................ 2
• Updated the user's guide title............................................................................................................................. 2
www.ti.com Schematic and Bill of Materials
SLVU264A – NOVEMBER 2008 – REVISED OCTOBER 2021
Submit Document Feedback
TPS54233 Step-Down Converter Evaluation Module User's Guide 13
Copyright © 2021 Texas Instruments Incorporated