Texas Instruments TMUX646EVM, Руководство пользователя

Страница: 6 / 22

5 EVM Setup
The following instructions are for setting up the EVM:
1. If you desire to use this EVM with all channels loaded, then solder down your chosen 0805 components to
the channels you wish to test. Table 5-1 describes which loads correspond to what pin on the TMUX646.
Table 5-1. Configurable Load Matrix
Pin Name 0805 Resistor Pad ID (SE) 0805 Capacitor Pad ID (D) 0805 Resistor Pad ID (D)
D1P R12 C4 R10
D1N R11 C4 R10
D2P R9 C3 R7
D2N R8 C3 R7
D3P R6 C2 R4
D3N R5 C2 R4
D4P R3 C1 R1
D4N R2 C1 R1
CLKP R14 C5 R13
CLKN R15 C5 R13
DA1P R21 C7 R19
DA1N R20 C7 R19
DA2P R24 C8 R22
DA2N R23 C8 R22
DA3P R27 C9 R25
DA3N R26 C9 R25
DA4P R30 C10 R28
DA4N R29 C10 R28
CLKAP R17 C6 R16
CLKAN R18 C6 R16
DB1P R36 C12 R34
DB1N R35 C12 R34
DB2P R39 C13 R37
DB2N R38 C13 R37
DB3P R42 C14 R40
DB3N R41 C14 R40
DB4P R45 C15 R43
DB4N R44 C15 R43
CLKBP R33 C11 R31
CLKBN R32 C11 R31
EVM Setup www.ti.com
6 TMUX646EVM User's Guide SCDU025 – MAY 2021
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated