Texas Instruments TMS320VC5501 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 30

Texas Instruments TMS320VC5501 Скачать руководство пользователя страница 4

Related Documentation From Texas Instruments

4

Instruction Cache

SPRU630C

TMS320C55x Technical Overview

(literature number SPRU393). This

overview is an introduction to the TMS320C55x DSPs, the latest
generation of fixed-point DSPs in the TMS320C5000



DSP platform.

Like the previous generations, this processor is optimized for high
performance and low-power operation. This book describes the CPU
architecture, low-power enhancements, and embedded emulation
features.

TMS320C55x DSP CPU Reference Guide

(literature number SPRU371)

describes the architecture, registers, and operation of the CPU for the
TMS320C55x DSPs.

TMS320C55x DSP Peripherals Overview Reference Guide

(literature

number SPRU317) introduces the peripherals, interfaces, and related
hardware that are available on TMS320C55x DSPs.

TMS320C55x DSP Algebraic Instruction Set Reference Guide

(literature

number SPRU375) describes the TMS320C55x DSP algebraic
instructions individually. Also includes a summary of the instruction set,
a list of the instruction opcodes, and a cross-reference to the mnemonic
instruction set.

TMS320C55x DSP Mnemonic Instruction Set Reference Guide

(literature

number SPRU374) describes the TMS320C55x DSP mnemonic
instructions individually. Also includes a summary of the instruction set,
a list of the instruction opcodes, and a cross-reference to the algebraic
instruction set.

TMS320C55x Optimizing C/C++ Compiler User’s Guide

(literature number

SPRU281) describes the TMS320C55x C/C++ Compiler. This C/C++
compiler accepts ISO standard C and C++ source code and produces
assembly language source code for TMS320C55x devices.

TMS320C55x Assembly Language Tools User’s Guide

(literature number

SPRU280) describes the assembly language tools (assembler, linker,
and other tools used to develop assembly language code), assembler
directives, macros, common object file format, and symbolic debugging
directives for TMS320C55x devices.

TMS320C55x DSP Programmer’s Guide

(literature number SPRU376)

describes ways to optimize C and assembly code for the TMS320C55x
DSPs and explains how to write code that uses special features and
instructions of the DSPs.

«
...
2
3
4
5
6
...
»

Содержание TMS320VC5501































Отзывы:

Нет отзывов