Texas Instruments TMS320DM6467 DVEVM, Руководство по началу работы, Страница: 45 / 72

Installing the Software
DVEVM Software Setup 4-13
Hints: You may want to use the printenv command to print a list of
your environment variables. You can also save these setenv
commands in a .txt file from which you can paste them in the future.
5) Save the environment so that you don't have to retype these
commands every time you cycle power on the EVM board:
EVM # saveenv
6) Boot the board using NFS:
EVM # boot
7) You can now log in as "root" with no password required.
See Section A.3, Alternate Boot Methods for information about booting
with TFTP or NFS and using flash or the EVM’s hard drive.
4.3.9 Notes on Using Evaluation/Production Codecs
As part of the DVSDK installation, you received a number of codecs:
❏
H.264 Base Profile Decoder
❏
H.264 HP Encoder
❏
MPEG2 Decoder
❏
MPEG4 AAC LC Decoder
❏
AAC Encoder
❏
G.711 Decoder (not a TI codec)
❏
G.711 Encoder (not a TI codec)
These codecs are provided under a "for demonstration-only" license
agreement. If you wish to use these codecs in a production development
environment, you can go to the http://www.ti.com/digitalmediasoftware
web site and click on "Software Inventory" to download the latest
production versions and the appropriate license agreement.