Texas Instruments TMS320DM6446 DVEVM v2.0, Руководство по началу работы

Страница: 69 / 76

Restoring and Updating the EVM Hard Disk Drive
Additional Procedures A-15
7) The script will ask for confirmation: "This will destroy all data on
/dev/hda1 - are you sure?" Type yes .
8) After the HDD restore is complete, shutdown the EVM:
EVM # halt
9) When the "Power down" message is printed in the terminal window,
it is safe to power down the EVM.
10) Restart the EVM and configure U-Boot to root mount via the local
HDD. Follow the steps in Section A.4.1, Booting from Flash Using the
EVM’s Hard Drive File System .
A.6.5 Restoring From Host Linux Workstation File System
This section assumes that you have installed the DVEVM software to the
host Linux /workdir/filesys/restore directory. After an NFS mount, this is
equivalent to /restore for the target EVM.
Follow these steps to restore the HDD from the host Linux workstation
restore directory:
1) On your host workstation, copy the restore directory from the TI
DVSDK disk to /home/< useracct >/workdir/filesys/restore. After NFS
mounting this file system, this will appear as the /restore directory on
the EVM.
2) Login to the EVM as root.