Restoring and Updating the EVM Hard Disk Drive
Additional Procedures
A-13
For example, you can create a terminal session with HyperTerminal
or TeraTerm on MS Windows, and Minicom or C-Kermit on Linux.
6) Start an NFS server on the host workstation. This document
assumes the host path /home/user/workdir/filesys contains a file
system that the target EVM can use for root mounting.
A.6.2
Configure EVM for NFS Root Mount
Follow these steps to configure your EVM for an NFS root mount:
1) Configure the Boot Switches (S3) to 1011111110. This is the bank of
switches in the middle of the EVM.
2) Power on the EVM and hit any key to enter U-Boot.
3) Configure bootcmd as follows to boot the Linux kernel via flash.
EVM #
setenv bootcmd bootm 0x2050000
Note:
If you have flashed a new kernel to the NOR flash at an
address other than 0x2050000, modify this command accordingly.
4) Configure bootargs as follows to root mount the file system from
NFS:
EVM #
setenv rootpath <
root directory to mount
>
EVM #
setenv nfshost <
ip address of nfs host
>
EVM #
setenv bootargs video=davincifb:vid0=720x576x16,
2500K:vid1=720x576x16,2500K:osd0=720x576x16,2025K
davinci_enc_mngr.ch0_output=COMPOSITE
davinci_enc_mngr.ch0_mode=$(videostd)
console=ttyS0,115200n8 noinitrd rw ip=dhcp root=/dev/nfs
nfsroot=$(nfshost):$(rootpath),nolock mem=120M
The nfsroot option in this command uses the host workstation IP
address. Make sure to replace the <
host ip addr
> with the actual
address of your host Linux workstation.
5) Optional: Print the U-Boot parameters
EVM #
printenv
6) Save the U-Boot parameters
EVM #
saveenv
7) Boot EVM from NFS on the host Linux workstation
EVM #
boot
8) Log into MontaVista Linux as "root".
Содержание TMS320DM6446 DVEVM v2.0
