www.ti.com
TMP103EVM Software Overview
17
SBOU099A – January 2011 – Revised April 2018
Submit Documentation Feedback
Copyright © 2011–2018, Texas Instruments Incorporated
TMP103EVM
6.2.7
Register Tab: Test EVM
The Register tab for the TMP103EVM test software also includes a sub-routine program to verify
communication with the TMP103 devices and run the TMP103 test procedures. By clicking on the
Test
EVM
button (refer to
Figure 20
), a new window appears as shown in
Figure 21
.
Figure 21. TMP103EVM Software: Test Procedure
This secondary program reads each register individually and verifies that the TMP103 sensors produce
the required number of
Acknowledges
from the general call and individual communication. To test the
general call, use the
Test All
button. To test the sensors individually, use the
Test TMPx
button next to
the corresponding LED.
