www.ti.com
TMP103EVM Software Overview
13
SBOU099A – January 2011 – Revised April 2018
Submit Documentation Feedback
Copyright © 2011–2018, Texas Instruments Incorporated
TMP103EVM
6.2
Using the TMP103EVM Software
6.2.1
Reading from Registers
When first starting the TMP103EVM software, users are advised to confirm connections to the board by
toggling the
Continuously Read All Register
button (highlighted in
Figure 16
). If all devices are
communicating correctly, the user should be able to see temperature change over time in the TMP Graph
and the individual TMP103 thermometers. A legend is provided in the Configuration Settings column on
the left for the temperature graph; refer to
Figure 17
.
Figure 16. TMP103EVM Software: Reading from Registers
An alternative method for acquiring data is the
Read All Reg
button, also indicated in
Figure 16
. This
button is useful while the
Auto-Write Reg
button is toggled, or if the user wants to take individual
measurements on a non-standard time interval.
NOTE:
The user cannot continuously press either the
Read All Registers
or the
Auto-Write
Registers
button.
